AMI CUCP210-31C Pillow Block Bearings

B:29.00 mm; d:45.000 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:78100 N; Grease Speed Rating Open/Shielded n1:4800 rpm; Fillet Radius ra:2.00 mm; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:5900 rpm; Basic Static Radial Load Rating Co:61000 N;

Housing washer:GS 89307; Roller and cage thrust assembly:K 89307 TN; r1,2 min.:1 mm; Basic static load rating C0:220 kN; B:7 mm; da min.:67 mm; d1:68 mm; D:68 mm; Mass bearing:0.34 kg; Shaft washer:WS 89307;

Oil Speed Rating n2:2600 rpm; Basic Static Radial Load Rating Co:255000 N; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:255000 N; B:82.60 mm; Accessories:Two Shields & Snap-R; Sealed Speed Rating n3:1800 rpm; D:215.0000 mm; d:100.000 mm; Fillet Radius ra:2.50 mm;

Oil Speed Rating n2:2200 rpm; Fillet Radius rb:1.00 mm; B:110.00 mm; Basic Dynamic Radial Load Rating C:390000 N; D:260.0000 mm; Grease Speed Rating n1:1600 rpm; Basic Static Radial Load Rating Co:530000 N; Fillet Radius ra:2.50 mm; d:120.000 mm;

d3:630 mm; b:40 mm; Associated spanner:TMFN 500-600; Associated eyebolt for handling:M 10; d1:580 mm; h:23 mm; Lock washer / Locking clip:MS 31/500; d2:540 mm; G:Tr 500x5; B5:100 mm;

Da max.:299 mm; b:13.9 mm; Calculation factor Y1:3; d2 ≈:223 mm; d1:180 mm; d3:240 mm; Basic static load rating C0:1530 kN; Calculation factor e:0.22; r1,2 min.:2.1 mm; Basic dynamic load rating C:1059 kN;

Da:37.5 mm; Mass bearing:0.086 kg; Basic static load rating C0:33.5 kN; r1,2 min.:0.3 mm; B:16 mm; ra max.:0.3 mm; D:42 mm; Basic dynamic load rating C:22 kN; Reference speed:13000 r/min; s max.:0.8 mm;

α:7 °; l3 min.:65 mm; d2 max.:104 mm; dk:60 mm; l5 ≈:30 mm; d:45 mm; C1 max.:28 mm; Basic dynamic load rating C:360 kN; G:M 42x3; Basic static load rating C0:224 kN;

R1:79.375 mm; P60°:189 kN; Lock washer:W 26; H1:152.4 mm; Labyrinth ring (db shaft position):LOR 136; Labyrinth ring (dc shaft position):LOR 122; J1:82.55 mm; h:52.388 mm; N1:25.4 mm; Cap bolt:2 x 1-8 UNC;

RG:3/8 NPT; PosiTrac Plus contact element:2 x B10724-37; P60°:101 kN; Appropriate attachment bolt size G:0.625 in; J max.:295.275 mm; h:40.481 mm; P150°:34.7 kN; Ca:64.795 mm; Da:160 mm; N1:19.05 mm;

D:18 mm; Permissible sliding velocity v min.:0 m/s; d:16 mm; Specific dynamic load factor K:40 N/mm²; Coefficient of friction µ min.:0.08; Mass bushing:0.011 kg; Permissible sliding velocity v max.:1 m/s; Tolerance housing:H7 m/s; Tolerance shaft:f7 m/s; Coefficient of friction µ ma

D:21 mm; Mass bushing:0.015 kg; Coefficient of friction µ max.:0.1; Tolerance shaft:h8; Specific dynamic load factor K:10 N/mm²; D1:27 mm; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; d:15 mm; B1:3 mm;

Appropriate attachment bolt size G:1 in; Bearing:22228 CCK/W33; Pa:28.5 kN; Stabilizing ring:SR-28-0; Mass pillow block:92.5 kg; Housing:SAFS 528; RG:3/4 NPT; Eye bolt:2 x 3/8-16 UNC; J1:85.725 mm; J min.:406.4 mm;

Distance J:3.2500 in; Dimension L:4.1250 in; Height H:3.7500 in; Width A:1.8750 in; Dimension H1:1.8750 in; Basic Static Radial Load Rating Co:3440 lbf; Shaft Diameter D:1 1/4 in; Dimension S1:1.0000 in; Thread Diameter G:1/2-13; Basic Dynamic Radial Load Rating:5730 lbf;

Sealed Speed Rating n3:7500 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:20400 N; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7500 rpm; B:25.40 mm; Accessories:One Seal; Basic Dynamic Radial Load Rating C:30700 N; D:62.0000 mm; Oil Speed Rating n2:10000 rpm;