REXROTH DR 20-5-5X/50Y R900598360 Pressure reducing valve

B:71.40 mm; D:160.0000 mm; Accessories:Two Seals; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:168000 N; d:75.000 mm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:140000 N; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3600 rpm;

α:105 °; Coefficient of friction µ max.:0.15; Tolerance housing:H7; B:16 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ min.:0.08; d:17 mm; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; Specific static load factor K0:45 N/mm²;

Accessories:Two Seals; Basic Dynamic Radial Load Rating C:255000 N; d:440.000 mm; B:46.00 mm; Sealed Speed Rating n3:0 rpm; Basic Static Radial Load Rating Co:405000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Oil Speed Rating Open/Shielded n2:1100 rpm; D:540.0000 mm;

Cap bolt recommended tightening torque:4284.4 N·m; P150°:236 kN; P120°:260 kN; P180°:285 kN; Bearing:22244 CCK/W33; P60°:691 kN; Cap bolt:1 1/2-6 UNC; Stabilizing ring:SR-44-38; A1:222.25 mm; RG:1 NPT;

Grease Speed Rating n1:3200 rpm; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; Accessories:No Shield, no Seal; Oil Speed Rating n2:4300 rpm; B:39.70 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:101000 N; D:125.0000 mm; Sealed Speed Rating n3:3200 rpm;

ba:74.612 mm; N1:28.575 mm; Initial grease fill:878.85 g; P180°:133 kN; Stabilizing ring:SR-34-0; End plug (suffix Y):EPR 18; P120°:127 kN; L:628.65 mm; Cap bolt:1-8 UNC; RG:3/4 NPT;

dk:92 mm; Mass rod end:10 kg; B:49 mm; h:265 mm; d:70 mm; C1 max.:43 mm; Basic static load rating C0:490 kN; α:6 °; l2 max.:349 mm; G:M 72x4;

Basic Radial Load Rating-Static SCO:4800 N; Basic Interchange FAF:203KLD; Accessories:87000 Shield & Seal; Fillet Radius ra:0.64 mm; Width - Inner Ring B1:13.70 mm; Basic Interchange NDH:87503; d:17.000 mm; D:40.0000 mm; Basic Interchange BCA:87503; Old MRC Bearing Number:203FSF;

Mass bearing:5600 kg; B:630 mm; Calculation factor kr:0.36; Basic static load rating C0:76500 kN; Fatigue load limit Pu:4550 kN; Limiting speed:280 r/min; D:1750 mm; da min.:1176 mm; F:1279 mm; Reference speed:200 r/min;

d2:82.55 mm; S:0.794 mm; L:244.475 mm; J max.:203.2 mm; Attachment bolt diameter G:15.875 mm; A1:84.931 mm; H:127 mm; Limiting speed:4500 r/min; da:55.563 mm; Mass bearing unit:6.12 kg;

D:420.0000 mm; B:65.00 mm; Accessories:Snap-Ring; Fillet Radius ra:3.00 mm; d:280.000 mm; Sealed Speed Rating n3:890 rpm; Grease Speed Rating Open/Shielded n1:1400 rpm; Basic Dynamic Radial Load Rating C:302000 N; Basic Static Radial Load Rating Co:405000 N; Oil Speed Rating Open/Shielded n2:1700 rp

Basic Dynamic Radial Load Rating C:436000 N; Oil Speed Rating n2:6700 rpm; D:260.0000 mm; Grease Speed Rating n1:4600 rpm; Fillet Radius ra:2.50 mm; Fillet Radius rb:1.00 mm; d:120.000 mm; Basic Static Radial Load Rating Co:600000 N; B:110.00 mm;

Pu:21.550 kN; Dynamic (Ca):181 kN; rs (min):2.1 mm; D:140 mm; d2 (max):90.7 mm; b1:15.5 mm; B:33 mm; E:mm; d2:65 mm; b:10 mm;

d3 max.:64.414 mm; d:45 mm; d1:33.337 mm; Lock nut:N 09; B:11.379 mm; Threads per inch:18; B4:12.598 mm; Mass adapter sleeve assembly:0.28 kg; Sleeve:S 9x1.5/16; Lock washer:W 09;

Preload class D GD:1840 N; db min.:106 mm; Static axial stiffness, preload class C:209 N/µm; ra max.:1 mm; Calculation factor f:1.23; Preload class B GB:460 N; d2:112.3 mm; dn:115.6 mm; Number of balls z:26; Static axial stiffness, preload class B:147 N/µm;