• 626-5698|
  • Request a quote
English
English
BEARING OF AMERICA CORP.
BEARING OF AMERICA CORP.

Timken lm102910 Bearing

  DAIKIN VZ63 Series Piston Pump   DAIKIN VZ80 Series Piston Pump   TOKYO KEIKI Double Vane Pump  
  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Home>Products>FAG Bearing>FAG 6014-TB-P6 Precision Ball Bearings

  • FAG 6014-TB-P6 Precision Ball Bearings
  • FAG 6014-TB-P6 Precision Ball Bearings
  • FAG 6014-TB-P6 Precision Ball Bearings
  • FAG 6014-TB-P6 Precision Ball Bearings

FAG 6014-TB-P6 MODELS

Need a CAD or 3D Model?

What is 6014-TB-P6 bearing cross reference？
Contact NowWhatsAppBe Our Agent

FAG 6014-TB-P6 Precision Ball Bearings

category

FAG Bearing

FAG 6014-TB-P6 SPECIFICATIONS

  • With BEARING OF AMERICA CORP. over 10170 full-service stores, our 3.560 mm R - Cone Backface To Clear Radius1 FAG 6014-TB-P6 Precision Ball Bearings inventory is extensive and our parts Stamped Steel Cage Type are priced right. within 24 XGA33212 Cone Part Number hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

  • FAG

  • 6014-TB-P6

  • w/o Integral Valves
  • Flange Mount
  • Right Hand (CW)
  • 5.96
  • Outlet 135° CW from Inlet
  • Flange
  • 45
  • Standard Pilot
BEARING OF AMERICA CORP.

BEARING OF AMERICA CORP.China

  • BEARING OF AMERICA CORP.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

FAG 6014-TB-P6 Precision Ball Bearings Interchange guide

  • 1.25 in
  • 3.37
  • 3525VQ
  • 2.5 in
  • Buna-N
  • 2500
  • 25.5
  • SAE C, 2 Bolt
  • Single Shaft Seal
  • N/A
  • 2500
  • 2500
  • N/A
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • N/A
  • 3000
  • 1 in Flange
  • Outlet 90° CW from Inlet
  • N/A
  • 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm
  • 3525VQ30A17-1DD20
  • 1 1/4 in Flange

FAG 6014-TB-P6 FAG 6014-TB-P6 Precision Ball Bearings Product Identifiers

@@@@@@@@

No.BrandJmhDbdIH
ZKLF60145-2ZINA120 mm - - 145 mm3 mm60 mm35 mm -
16014FAG - 0,438 kg / Weight - 110 mm - 70 mm - -
16014-2RSLoyal - - - 110 mm - 70 mm - -
16014-2ZZEN - - - 110 mm - 70 mm - -
16014ZZLoyal - - - 110 mm - 70 mm - -
AST650 140160140AST - - - 160 - 140 - -
4R6014NTN - - - 400,000 mm - 300,000 mm - -
360141SKF - - 45 mm1080 mm31 mm710 mm - -
BEAM 060145-2RSSKF120 mm - - 145 mm - 60 mm - 8.8 mm
BEAM 060145-2RZSKF120 mm - - 145 mm - 60 mm - 8.8 mm
SS 6014ISB - - - 110 mm - 70 mm - -

 

65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball BearingsSpline Description:76.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Model No.:Right Hand (CW); Shaft Seal Type:3525VQ30A17-1DD20; Displacement Shaft End (cu in/revolution):3; Major Diameter [Min:Flange; Port Size:5/16 in; Manufacturer Part No.:Standard Pilot; Shaft End Pressure [Max:1.25 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller BearingsShaft End RPM [Max:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Rotation:Right Hand (CW); Shaft End Flow @ RPM:3525VQ30A17-1DD20; Minor Diameter [Min:3; Relief Valve Setting:Flange; Model No.:5/16 in; Port Orientation - Cover End:Standard Pilot; Weight:1.25 in; Spline Description:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 6307-TB-P63 Precision Ball BearingsPort Orientation - Cover End:76.0 LB; Model No.:Flange Mount; Mounting:Right Hand (CW); Manufacturer Part No.:3525VQ30A17-1DD20; Cover End RPM [Max:3; GPM @ 1,800 rpm, Cover End:Flange; Integral Valve Configuration:5/16 in; Shaft End Flow @ RPM:Standard Pilot; Shaft Seal Type:1.25 in; Rotation:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 23220-E1-K-TVPB-C2 Spherical Roller BearingsPort Orientation - Shaft End:76.0 LB; Shaft End Flow @ RPM:Flange Mount; Cover End Pressure [Max:Right Hand (CW); Model No.:3525VQ30A17-1DD20; Controlled Flow Rate:3; Port Size:Flange; Manufacturer Part No.:5/16 in; Pressure Port Size, Cover End:Standard Pilot; Pressure Port Size, Shaft End:1.25 in; Weight:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
Timken lm102910 BearingIntegral Valve Configuration:76.0 LB; Minor Diameter [Min:Flange Mount; Manufacturer Part No.:Right Hand (CW); Relief Valve Setting:3525VQ30A17-1DD20; Port Orientation - Shaft End:3; Spline Description:Flange; Pressure Port Size, Cover End:5/16 in; Pressure Port Size, Shaft End:Standard Pilot; Shaft End Flow @ RPM:1.25 in; Weight:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 239/600-B-K-MB-T52BW Spherical Roller BearingsPort Size:76.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Seal Type:Right Hand (CW); Displacement Cover End (cu in/revolution):3525VQ30A17-1DD20; Port Orientation - Shaft End:3; Pressure Port Size, Shaft End:Flange; Major Diameter [Min:5/16 in; Cover End Pressure [Max:Standard Pilot; Model No.:1.25 in; Displacement Shaft End (cu in/revolution):Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 6316-P6-C3 Precision Ball BearingsMinor Diameter [Max:76.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Major Diameter [Max:Right Hand (CW); Mounting:3525VQ30A17-1DD20; Port Orientation - Shaft End:3; Cover End RPM [Max:Flange; Cover End Flow @ RPM:5/16 in; Integral Valve Configuration:Standard Pilot; Relief Valve Setting:1.25 in; Weight:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 6414-MA-C3 Single Row Ball BearingsMajor Diameter [Max:76.0 LB; Cover End Flow @ RPM:Flange Mount; Mounting Flange:Right Hand (CW); Rotation:3525VQ30A17-1DD20; Port Orientation - Shaft End:3; Spline Description:Flange; Shaft End Pressure [Max:5/16 in; Pressure Port Size, Shaft End:Standard Pilot; Port Orientation - Cover End:1.25 in; Minor Diameter [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG N214-E-TVP2-C3 Cylindrical Roller BearingsCover End RPM [Max:76.0 LB; Port Orientation - Shaft End:Flange Mount; Pressure Port Size, Shaft End:Right Hand (CW); Displacement Shaft End (cu in/revolution):3525VQ30A17-1DD20; Model No.:3; Shaft End Flow @ RPM:Flange; Cover End Flow @ RPM:5/16 in; Weight:Standard Pilot; Shaft End Pressure [Max:1.25 in; GPM @ 1,800 rpm, Shaft End:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG B7216-E-T-P4S-UM Precision Ball BearingsCover End Pressure [Max:76.0 LB; Port Orientation - Cover End:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Cover End RPM [Max:3525VQ30A17-1DD20; Shaft End Flow @ RPM:3; Rotation:Flange; Mounting Flange:5/16 in; Weight:Standard Pilot; Minor Diameter [Max:1.25 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 6312-Z-C3 Single Row Ball BearingsPort Size:76.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Spline Description:Right Hand (CW); Shaft End Flow @ RPM:3525VQ30A17-1DD20; Major Diameter [Max:3; Rotation:Flange; Port Orientation - Cover End:5/16 in; Cover End RPM [Max:Standard Pilot; Minor Diameter [Min:1.25 in; Shaft End Pressure [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 718/560-MP Angular Contact Ball BearingsWeight:76.0 LB; Controlled Flow Rate:Flange Mount; Shaft End Pressure [Max:Right Hand (CW); Pressure Port Size, Cover End:3525VQ30A17-1DD20; Mounting Flange:3; Model No.:Flange; Displacement Cover End (cu in/revolution):5/16 in; GPM @ 1,800 rpm, Cover End:Standard Pilot; Rotation:1.25 in; Mounting:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 7920.ETP4SUL Precision Ball BearingsCover End Flow @ RPM:76.0 LB; Shaft Seal Type:Flange Mount; Minor Diameter [Max:Right Hand (CW); Major Diameter [Min:3525VQ30A17-1DD20; Rotation:3; GPM @ 1,800 rpm, Shaft End:Flange; Minor Diameter [Min:5/16 in; Relief Valve Setting:Standard Pilot; Displacement Cover End (cu in/revolution):1.25 in; Mounting:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;
FAG 6009-MA-C3 Single Row Ball BearingsGPM @ 1,800 rpm, Shaft End:76.0 LB; Cover End Flow @ RPM:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Manufacturer Part No.:3525VQ30A17-1DD20; Port Orientation - Cover End:3; Major Diameter [Max:Flange; Pressure Port Size, Cover End:5/16 in; Shaft End Pressure [Max:Standard Pilot; Port Orientation - Shaft End:1.25 in; Cover End RPM [Max:Straight w/ Key; Pump Series:3525VQ; Shaft Length:2.5 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Cover End RPM [Max:2500; Shaft End RPM [Max:2500; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm; Manufacturer Part No.:3525VQ30A17-1DD20; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:45; Integral Valve Configuration:w/o Integral Valves; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Flange; Pressure Port Size, Shaft End:1 1/4 in Flange; Displacement Cover End (cu in/revolution):3.37; Displacement Shaft End (cu in/revolution):5.96;

 

FAG (Schaeffler) - Motion Industries

Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the 

INA/FAG Industrial Bearings from National Precision Bearing

INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball

Products / Services | Bearing ... - Schaeffler North America

FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing 

FAG Bearings | E.B. Atmus Co., Inc

FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany 

Deep groove ball bearing by FAG | Schaeffler Germany

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads

 

FAG 6014-TB-P6 Precision Ball Bearings Video

 

Contact Us

BEARING OF AMERICA CORP.
Address5030 Corporate Way Richmond, Kentucky 40475, U.S.A.
Phone(Working Time)626-5698
  • BEARING OF AMERICA CORP.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG 6014-TB-P6 Technical Articles

90x190x46.5 bearing dimensions tolerances
VXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup TypeVXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup Type: Single-Row Tapered Roller Bearing Size: 90mmx190mmx46.5mm Bearing Inner Diameter:  Tapered Roller Bearing 31318 90x190x46.5 mm -...
6.35x15.875x4.978 bearing dimensions
Stainless Steel Bearing SS-R4 >>> 6.35x15.875x4.978, 2,55 €Stainless Steel Miniature Bearing SS-R4 6.35x15.875x4.978 > excellent Bearing | mostly lubricated with grease for the food industry > easy relubrication Fr4-zz Flanged...
600x980x375 bearing table
FAG 241/600BK30MB+H241/600 bearing 600x980x375Enquiry FAG 241/600BK30MB+H241/600 Spherical Roller Bearings from bearingforworld, demensions: 600x980x375 Bearings Online KOYO 241/600RK30 bearing in India - 600x980x375KOYO 241/600RK30 bearing in...

FAG Bearing CATEGORIES

  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
  • TOKYO KEIKI P Series Piston Pump
  • TOKYO KEIKI P*V Series Piston Pump
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI SQP Series Triple Vane Pump
  • TOKYO KEIKI Vane Pump
  • FAG Bearing
  • NSK Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • BOSTON GEAR BEARING
  • BROWNING BEARING
  • CONSOLIDATED BEARING
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valve
  • REXROTH Pressure relief valve
  • REXROTH Valves
  • REXROTH Pressure reducing valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Throttle check valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • REXROTH Directional spool valves
  • REXROTH Check valves
  • 6203du Bearing
  • tmst 3 Bearing
  • 698z Bearing
  • 608 bearing skf Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
  • Original Hydraulic Pump
MORE

Customers Who Viewed FAG 6014-TB-P6 Also Viewed

  • Timken lm102910 Bearing
  • 100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings
  • FAG 6312-Z-C3 Single Row Ball Bearings
  • FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings
  • FAG 6414-MA-C3 Single Row Ball Bearings

Top Products

80 mm x 4.528 Inch | 115 Millimeter x 8.5 mm SKF WS 81216 Thrust Roller Bearing TOKYO KEIKI QP4-60-86C-18 Single Vane Pump DAIKIN VZ80C44RHX-10 VZ80 Series Piston Pump
get in touch with 11 Inch | 279.4 Millimeter x 12 Inch | 304.8 Millimeter x 0.5 Inch | 12.7 Millimet Timken lm102910 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING OF AMERICA CORP.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Contact Us