• 626-5698|
  • Request a quote
English
English
BEARING OF AMERICA CORP.
BEARING OF AMERICA CORP.

Timken lm102910 Bearing

  DAIKIN VZ63 Series Piston Pump   DAIKIN VZ80 Series Piston Pump   TOKYO KEIKI Double Vane Pump  
  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Home>Products>FAG Bearing>FAG 6203-2Z-N-L038 Single Row Ball Bearings

  • FAG 6203-2Z-N-L038 Single Row Ball Bearings
  • FAG 6203-2Z-N-L038 Single Row Ball Bearings
  • FAG 6203-2Z-N-L038 Single Row Ball Bearings
  • FAG 6203-2Z-N-L038 Single Row Ball Bearings

FAG 6203-2Z-N-L038 MODELS

Need a CAD or 3D Model?

What is 6203-2Z-N-L038 bearing interchange？
Contact NowWhatsAppBe Our Agent

FAG 6203-2Z-N-L038 Single Row Ball Bearings

category

FAG Bearing

FAG 6203-2Z-N-L038 SPECIFICATIONS

  • Enjoy BEARING OF AMERICA CORP. High Margins on Competitive 270 mm Da max. FAG Bearing Pricing.Great Wholesale Products at Low Costs.

  • FAG

  • 6203-2Z-N-L038

  • 101.0 LB
  • Flange Mount
  • 3.4
  • 4525V42A17-86DD22R
  • 3.5
  • Outlet 90° CW from Inlet
  • 8.4
  • 22
BEARING OF AMERICA CORP.

BEARING OF AMERICA CORP.China

  • BEARING OF AMERICA CORP.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

FAG 6203-2Z-N-L038 Single Row Ball Bearings Interchange guide

  • Standard Pilot
  • 1 in Code 61
  • Straight w/ Key
  • Outlet 135° CW from Inlet
  • 25.5
  • Double
  • 63
  • 2500
  • N/A
  • 4525V42A17-86DD22R
  • Single Shaft Seal
  • N/A
  • 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm
  • 1800
  • 1800
  • 2500
  • 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm
  • N/A
  • 1 1/2 in Code 61
  • N/A
  • N/A
  • N/A
  • 4 Bolt Flange Per SAE J518C W/ English Threads
  • 135° CW From Inlet Port

FAG 6203-2Z-N-L038 FAG 6203-2Z-N-L038 Single Row Ball Bearings Product Identifiers

@@@@@@@@

No.BrandWBZDHmdC
ZR1.16.0380.400-1SPPNISB - - 60 mm451 mm45 mm5 mm291 mm -
038KB68NACHI - 16,5 mm - 68 mm - - 38,5 mm15 mm
038KC68NACHI - 16,5 mm - 68 mm - - 38,5 mm15 mm
720003800INA - 25 mm - 62 mm - - 42 mm -
TL23038CAE4NSK - 75 mm - 290 mm - - 190 mm775 kN
TL23038CAKE4NSK - 75 mm - 290 mm - - 190 mm775 kN
TRU 203820IKO - 20 mm - 38 mm - - 20 mm12,1 kN
TRU 203820UUIKO - 20 mm - 38 mm - - 20 mm12,1 kN
TRU 203825IKO - 25 mm - 38 mm - - 20 mm18,7 kN
TRU 203825UUIKO - 25 mm - 38 mm - - 20 mm18,7 kN
RW306203KBC38.894 mm - - 30 mm - - 15.918 mm -

 

FAG 6312-Z-C3 Single Row Ball BearingsGPM @ 1,800 rpm, Shaft End:101.0 LB; Weight:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Spline Description:4525V42A17-86DD22R; Shaft Seal Type:3.5; Cover End Pressure [Max:Flange; Shaft End RPM [Max:3/8 in; Port Orientation - Shaft End:22; Relief Valve Setting:Standard Pilot; Displacement Shaft End (cu in/revolution):1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG N214-E-TVP2-C3 Cylindrical Roller BearingsShaft End Flow @ RPM:101.0 LB; Major Diameter [Min:Flange Mount; Shaft Seal Type:Right Hand (CW); Controlled Flow Rate:4525V42A17-86DD22R; Integral Valve Configuration:3.5; GPM @ 1,800 rpm, Cover End:Flange; Rotation:3/8 in; Minor Diameter [Min:22; Model No.:Standard Pilot; Displacement Shaft End (cu in/revolution):1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 6414-MA-C3 Single Row Ball BearingsRotation:101.0 LB; Spline Description:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Weight:4525V42A17-86DD22R; Minor Diameter [Min:3.5; Mounting:Flange; Controlled Flow Rate:3/8 in; Mounting Flange:22; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Cover End Flow @ RPM:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 7920.ETP4SUL Precision Ball BearingsPressure Port Size, Shaft End:101.0 LB; Shaft End Flow @ RPM:Flange Mount; Manufacturer Part No.:Right Hand (CW); Port Orientation - Cover End:4525V42A17-86DD22R; Pressure Port Size, Cover End:3.5; Mounting:Flange; Cover End Flow @ RPM:3/8 in; Minor Diameter [Max:22; Minor Diameter [Min:Standard Pilot; Model No.:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 718/560-MP Angular Contact Ball BearingsControlled Flow Rate:101.0 LB; Manufacturer Part No.:Flange Mount; Mounting:Right Hand (CW); GPM @ 1,800 rpm, Cover End:4525V42A17-86DD22R; Relief Valve Setting:3.5; Minor Diameter [Max:Flange; Pressure Port Size, Cover End:3/8 in; Major Diameter [Min:22; Shaft End RPM [Max:Standard Pilot; Cover End Flow @ RPM:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG B7216-E-T-P4S-UM Precision Ball BearingsMajor Diameter [Max:101.0 LB; Mounting:Flange Mount; Model No.:Right Hand (CW); Displacement Cover End (cu in/revolution):4525V42A17-86DD22R; Cover End RPM [Max:3.5; Major Diameter [Min:Flange; Minor Diameter [Max:3/8 in; Shaft Seal Type:22; Controlled Flow Rate:Standard Pilot; Shaft End Pressure [Max:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball BearingsShaft End Flow @ RPM:101.0 LB; Minor Diameter [Min:Flange Mount; Weight:Right Hand (CW); Displacement Cover End (cu in/revolution):4525V42A17-86DD22R; Port Orientation - Shaft End:3.5; Cover End RPM [Max:Flange; Controlled Flow Rate:3/8 in; Pressure Port Size, Cover End:22; Port Size:Standard Pilot; Shaft Seal Type:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller BearingsMajor Diameter [Min:101.0 LB; Displacement Shaft End (cu in/revolution):Flange Mount; Minor Diameter [Min:Right Hand (CW); Shaft End RPM [Max:4525V42A17-86DD22R; Shaft End Pressure [Max:3.5; Port Orientation - Cover End:Flange; Major Diameter [Max:3/8 in; Mounting:22; Shaft End Flow @ RPM:Standard Pilot; Integral Valve Configuration:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
Timken lm102910 BearingMajor Diameter [Max:101.0 LB; Relief Valve Setting:Flange Mount; Manufacturer Part No.:Right Hand (CW); Port Orientation - Shaft End:4525V42A17-86DD22R; Port Size:3.5; Major Diameter [Min:Flange; Minor Diameter [Min:3/8 in; Model No.:22; Cover End RPM [Max:Standard Pilot; Cover End Flow @ RPM:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 23220-E1-K-TVPB-C2 Spherical Roller BearingsGPM @ 1,800 rpm, Cover End:101.0 LB; Shaft Seal Type:Flange Mount; Mounting:Right Hand (CW); Spline Description:4525V42A17-86DD22R; Minor Diameter [Min:3.5; Relief Valve Setting:Flange; Minor Diameter [Max:3/8 in; Shaft End RPM [Max:22; Shaft End Flow @ RPM:Standard Pilot; Controlled Flow Rate:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 6009-MA-C3 Single Row Ball BearingsCover End Pressure [Max:101.0 LB; Mounting:Flange Mount; GPM @ 1,800 rpm, Cover End:Right Hand (CW); Major Diameter [Max:4525V42A17-86DD22R; Minor Diameter [Max:3.5; Controlled Flow Rate:Flange; Shaft Seal Type:3/8 in; Port Orientation - Cover End:22; Spline Description:Standard Pilot; Displacement Cover End (cu in/revolution):1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 239/600-B-K-MB-T52BW Spherical Roller BearingsMajor Diameter [Min:101.0 LB; Shaft Seal Type:Flange Mount; Pressure Port Size, Cover End:Right Hand (CW); Displacement Shaft End (cu in/revolution):4525V42A17-86DD22R; Cover End Pressure [Max:3.5; Controlled Flow Rate:Flange; Weight:3/8 in; Spline Description:22; Minor Diameter [Min:Standard Pilot; Manufacturer Part No.:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 6316-P6-C3 Precision Ball BearingsShaft End Pressure [Max:101.0 LB; Rotation:Flange Mount; Displacement Cover End (cu in/revolution):Right Hand (CW); Major Diameter [Max:4525V42A17-86DD22R; Spline Description:3.5; Model No.:Flange; Cover End RPM [Max:3/8 in; Shaft End RPM [Max:22; Shaft End Flow @ RPM:Standard Pilot; Major Diameter [Min:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;
FAG 6307-TB-P63 Precision Ball BearingsPort Orientation - Cover End:101.0 LB; Shaft End RPM [Max:Flange Mount; Shaft Seal Type:Right Hand (CW); Major Diameter [Max:4525V42A17-86DD22R; Displacement Shaft End (cu in/revolution):3.5; Minor Diameter [Min:Flange; Weight:3/8 in; Controlled Flow Rate:22; Mounting Flange:Standard Pilot; Integral Valve Configuration:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4525V; Shaft Length:3 7/16 in; Configuration:Double; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A; Vane Function Type:Motor; Cover End RPM [Max:1800; Shaft End RPM [Max:1800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm; Major Diameter [Max:N/A; Major Diameter [Min:N/A; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:N/A; Shaft End Flow @ RPM:42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm; Manufacturer Part No.:4525V42A17-86DD22R; Front Outlet Port Type:4 Bolt Flange Per SAE J518C W/ English Threads; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:25.5; GPM @ 1,800 rpm, Shaft End:63; Outlet Port Position [Rear:135° CW From Inlet Port; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1 in Code 61; Pressure Port Size, Shaft End:1 1/2 in Code 61; Displacement Cover End (cu in/revolution):3.4; Displacement Shaft End (cu in/revolution):8.4;

 

FAG Bearings | E.B. Atmus Co., Inc

FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany 

INA/FAG Industrial Bearings from National Precision Bearing

INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball

Deep groove ball bearing by FAG | Schaeffler Germany

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads

Products / Services | Bearing ... - Schaeffler North America

FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing 

FAG (Schaeffler) - Motion Industries

Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the 

 

FAG 6203-2Z-N-L038 Single Row Ball Bearings Video

 

Contact Us

BEARING OF AMERICA CORP.
Address5030 Corporate Way Richmond, Kentucky 40475, U.S.A.
Phone(Working Time)626-5698
  • BEARING OF AMERICA CORP.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG 6203-2Z-N-L038 Technical Articles

90x190x46.5 bearing dimensions tolerances
VXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup TypeVXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup Type: Single-Row Tapered Roller Bearing Size: 90mmx190mmx46.5mm Bearing Inner Diameter:  Tapered Roller Bearing 31318 90x190x46.5 mm -...
6.35x15.875x4.978 bearing dimensions
Stainless Steel Bearing SS-R4 >>> 6.35x15.875x4.978, 2,55 €Stainless Steel Miniature Bearing SS-R4 6.35x15.875x4.978 > excellent Bearing | mostly lubricated with grease for the food industry > easy relubrication Fr4-zz Flanged...
600x980x375 bearing table
FAG 241/600BK30MB+H241/600 bearing 600x980x375Enquiry FAG 241/600BK30MB+H241/600 Spherical Roller Bearings from bearingforworld, demensions: 600x980x375 Bearings Online KOYO 241/600RK30 bearing in India - 600x980x375KOYO 241/600RK30 bearing in...

FAG Bearing CATEGORIES

  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
  • TOKYO KEIKI P Series Piston Pump
  • TOKYO KEIKI P*V Series Piston Pump
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI SQP Series Triple Vane Pump
  • TOKYO KEIKI Vane Pump
  • FAG Bearing
  • NSK Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • BOSTON GEAR BEARING
  • BROWNING BEARING
  • CONSOLIDATED BEARING
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valve
  • REXROTH Pressure relief valve
  • REXROTH Valves
  • REXROTH Pressure reducing valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Throttle check valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • REXROTH Directional spool valves
  • REXROTH Check valves
  • 6203du Bearing
  • tmst 3 Bearing
  • 698z Bearing
  • 608 bearing skf Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
  • Original Hydraulic Pump
MORE

Customers Who Viewed FAG 6203-2Z-N-L038 Also Viewed

  • Timken lm102910 Bearing
  • 100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings
  • FAG 6312-Z-C3 Single Row Ball Bearings
  • FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings
  • FAG 6414-MA-C3 Single Row Ball Bearings

Top Products

80 mm x 4.528 Inch | 115 Millimeter x 8.5 mm SKF WS 81216 Thrust Roller Bearing TOKYO KEIKI QP4-60-86C-18 Single Vane Pump DAIKIN VZ80C44RHX-10 VZ80 Series Piston Pump
get in touch with 11 Inch | 279.4 Millimeter x 12 Inch | 304.8 Millimeter x 0.5 Inch | 12.7 Millimet Timken lm102910 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING OF AMERICA CORP.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Contact Us