• 626-5698|
  • Request a quote
English
English
BEARING OF AMERICA CORP.
BEARING OF AMERICA CORP.

Timken lm102910 Bearing

  DAIKIN VZ63 Series Piston Pump   DAIKIN VZ80 Series Piston Pump   TOKYO KEIKI Double Vane Pump  
  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Home>Products>FAG Bearing>FAG QJ312-MPA-C3 Angular Contact Ball Bearings

  • FAG QJ312-MPA-C3  Angular Contact Ball Bearings
  • FAG QJ312-MPA-C3  Angular Contact Ball Bearings
  • FAG QJ312-MPA-C3  Angular Contact Ball Bearings
  • FAG QJ312-MPA-C3  Angular Contact Ball Bearings

FAG QJ312-MPA-C3 MODELS

Need a CAD or 3D Model?

What is QJ312-MPA-C3 bearing interchange?
Contact NowWhatsAppBe Our Agent

FAG QJ312-MPA-C3 Angular Contact Ball Bearings

category

FAG Bearing

FAG QJ312-MPA-C3 SPECIFICATIONS

  • What are the dimensions of 78.5 mm db (min) 156,000 N Dynamic Load Rating a FAG QJ312-MPA-C3 Angular Contact Ball Bearings? FAG Bearing Manufacturing 86 mm dc (min) Service . BEARING OF AMERICA CORP. Get Your Free, Instant Quote‎!

  • FAG
  • QJ312-MPA-C3

  • 16.5
  • 3/4 in Flange
  • 3000
  • 2520VQP21A11-11AA3F-20LH
  • Outlet 135° CCW from Inlet
  • 31.5
  • N/A
  • Standard Pilot
BEARING OF AMERICA CORP.

BEARING OF AMERICA CORP.China

  • BEARING OF AMERICA CORP.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

FAG QJ312-MPA-C3 Angular Contact Ball Bearings Interchange guide

  • 0.875 in
  • 1 in Flange
  • 2520VQ
  • 1.375 in
  • Buna-N
  • Outlet Opposite Inlet
  • 0.715 in
  • 2.22
  • Single Shaft Seal
  • 16/32
  • 2700
  • 2500
  • Priority Valve & Relief
  • 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm
  • 0.873 in
  • 0.872 in
  • N/A
  • 4.12
  • 1500 psi
  • 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm
  • 2520VQP21A11-11AA3F-20LH
  • 3000

FAG QJ312-MPA-C3 FAG QJ312-MPA-C3 Angular Contact Ball Bearings Product Identifiers

@@@@@@@@

No.BrandHebdFSmC
YSA 212-2FK + H 2312SKF - - - 55 mm - - - 26 mm
17BM2312KOYO - - - 17 - - - 10,3 kN
17MM2312KOYO - - 9,6 mm17 - - - 10,3 kN
YH-1312NSK - - - 20,638 - - - 25,6 kN
YSA212-2FK+HS2312SKF - - - 53,975 mm - - - 52,7 kN
ZSL192312NBS - - - 60 mm73,62 mm3 mm - 270 kN
WS22312-E1-2RSRFAG - 0,35 - 60 mm - - 3,4 kg / Weight -
23231282573BMW - - - 46 mm - - - -
25R3124KOYO - - - 25 - - - 24,9 kN
W-3120-CTimken425,4 mm - - 253,975 mm - - - -
YBH 1312IKO - - - 20,638 - - - 27,2 kN

 

100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller BearingsCover End RPM [Max:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End Pressure [Max:Left Hand (CCW); Mounting Flange:2520VQP21A11-11AA3F-20LH; GPM @ 1,800 rpm, Shaft End:2 1/2; Pressure Port Size, Cover End:Flange; Minor Diameter [Min:N/A; Mounting:Standard Pilot; Controlled Flow Rate:0.875 in; Port Size:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 6414-MA-C3 Single Row Ball BearingsMinor Diameter [Min:45.0 LB; Spline Description:Flange Mount; Relief Valve Setting:Left Hand (CCW); Major Diameter [Min:2520VQP21A11-11AA3F-20LH; Integral Valve Configuration:2 1/2; Manufacturer Part No.:Flange; GPM @ 1,800 rpm, Shaft End:N/A; Mounting Flange:Standard Pilot; Pressure Port Size, Shaft End:0.875 in; Pressure Port Size, Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
Timken lm102910 BearingIntegral Valve Configuration:45.0 LB; Cover End Flow @ RPM:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Pressure Port Size, Cover End:2520VQP21A11-11AA3F-20LH; Manufacturer Part No.:2 1/2; Minor Diameter [Min:Flange; Shaft End Pressure [Max:N/A; Rotation:Standard Pilot; Relief Valve Setting:0.875 in; Major Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG N214-E-TVP2-C3 Cylindrical Roller BearingsMajor Diameter [Max:45.0 LB; Rotation:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Shaft End RPM [Max:2520VQP21A11-11AA3F-20LH; Relief Valve Setting:2 1/2; Mounting Flange:Flange; Integral Valve Configuration:N/A; Pressure Port Size, Cover End:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 718/560-MP Angular Contact Ball BearingsMounting Flange:45.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Pressure Port Size, Cover End:Left Hand (CCW); Model No.:2520VQP21A11-11AA3F-20LH; Mounting:2 1/2; Cover End RPM [Max:Flange; Displacement Shaft End (cu in/revolution):N/A; Minor Diameter [Max:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG B7216-E-T-P4S-UM Precision Ball BearingsPressure Port Size, Cover End:45.0 LB; Rotation:Flange Mount; Integral Valve Configuration:Left Hand (CCW); Port Orientation - Shaft End:2520VQP21A11-11AA3F-20LH; Controlled Flow Rate:2 1/2; Manufacturer Part No.:Flange; Shaft Seal Type:N/A; Spline Description:Standard Pilot; Shaft End Flow @ RPM:0.875 in; Port Orientation - Cover End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 239/600-B-K-MB-T52BW Spherical Roller BearingsDisplacement Cover End (cu in/revolution):45.0 LB; Cover End RPM [Max:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Port Orientation - Shaft End:2520VQP21A11-11AA3F-20LH; Port Orientation - Cover End:2 1/2; Shaft End RPM [Max:Flange; Shaft Seal Type:N/A; Shaft End Pressure [Max:Standard Pilot; Model No.:0.875 in; Integral Valve Configuration:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 6009-MA-C3 Single Row Ball BearingsSpline Description:45.0 LB; Rotation:Flange Mount; Port Size:Left Hand (CCW); Shaft End Flow @ RPM:2520VQP21A11-11AA3F-20LH; Weight:2 1/2; Mounting Flange:Flange; Cover End Flow @ RPM:N/A; GPM @ 1,800 rpm, Shaft End:Standard Pilot; Shaft End RPM [Max:0.875 in; Displacement Cover End (cu in/revolution):13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 6316-P6-C3 Precision Ball BearingsMajor Diameter [Min:45.0 LB; GPM @ 1,800 rpm, Shaft End:Flange Mount; Shaft Seal Type:Left Hand (CCW); Port Orientation - Shaft End:2520VQP21A11-11AA3F-20LH; Displacement Cover End (cu in/revolution):2 1/2; Major Diameter [Max:Flange; Pressure Port Size, Shaft End:N/A; Port Size:Standard Pilot; Minor Diameter [Min:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 6307-TB-P63 Precision Ball BearingsGPM @ 1,800 rpm, Shaft End:45.0 LB; Pressure Port Size, Shaft End:Flange Mount; Shaft End Flow @ RPM:Left Hand (CCW); Port Orientation - Shaft End:2520VQP21A11-11AA3F-20LH; Manufacturer Part No.:2 1/2; Minor Diameter [Min:Flange; Port Orientation - Cover End:N/A; Shaft End Pressure [Max:Standard Pilot; Model No.:0.875 in; Mounting Flange:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 23220-E1-K-TVPB-C2 Spherical Roller BearingsMajor Diameter [Min:45.0 LB; Cover End Flow @ RPM:Flange Mount; Manufacturer Part No.:Left Hand (CCW); Port Size:2520VQP21A11-11AA3F-20LH; Major Diameter [Max:2 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Port Orientation - Shaft End:N/A; Rotation:Standard Pilot; Model No.:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 7920.ETP4SUL Precision Ball BearingsShaft Seal Type:45.0 LB; Manufacturer Part No.:Flange Mount; Cover End RPM [Max:Left Hand (CCW); Spline Description:2520VQP21A11-11AA3F-20LH; Port Orientation - Cover End:2 1/2; Mounting:Flange; Port Size:N/A; Relief Valve Setting:Standard Pilot; Minor Diameter [Max:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
FAG 6312-Z-C3 Single Row Ball BearingsSpline Description:45.0 LB; Cover End RPM [Max:Flange Mount; Displacement Shaft End (cu in/revolution):Left Hand (CCW); Shaft End Flow @ RPM:2520VQP21A11-11AA3F-20LH; Shaft End Pressure [Max:2 1/2; Pressure Port Size, Shaft End:Flange; Port Size:N/A; Mounting Flange:Standard Pilot; Rotation:0.875 in; Minor Diameter [Max:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;
65 mm x 140 mm x 58,7 mm FAG 3313-B-TVH Angular Contact Ball BearingsRotation:45.0 LB; Port Size:Flange Mount; Relief Valve Setting:Left Hand (CCW); Pressure Port Size, Cover End:2520VQP21A11-11AA3F-20LH; Displacement Shaft End (cu in/revolution):2 1/2; Mounting Flange:Flange; Shaft End RPM [Max:N/A; Spline Description:Standard Pilot; GPM @ 1,800 rpm, Cover End:0.875 in; Pressure Port Size, Shaft End:13 Tooth Splined; Pump Series:2520VQ; Shaft Length:1.375 in; Seal Material:Buna-N; Max. RPM [Max:2500; Minor Diameter:0.715 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:2700; Shaft End RPM [Max:2500; Controlled Flow Rate:3 gal/min; Cover End Flow @ RPM:11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:N/A; Minor Diameter [Min:N/A; Relief Valve Setting:1500 psi; Shaft End Flow @ RPM:21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm; Manufacturer Part No.:2520VQP21A11-11AA3F-20LH; Cover End Pressure [Max:3000; Shaft End Pressure [Max:3000; GPM @ 1,800 rpm, Cover End:16.5; GPM @ 1,800 rpm, Shaft End:31.5; Integral Valve Configuration:Priority Valve & Relief; Port Orientation - Cover End:Outlet 135° CCW from Inlet; Port Orientation - Shaft End:Outlet Opposite Inlet; Pressure Port Size, Cover End:3/4 in Flange; Pressure Port Size, Shaft End:1 in Flange; Displacement Cover End (cu in/revolution):2.22; Displacement Shaft End (cu in/revolution):4.12;

 

Deep groove ball bearing by FAG | Schaeffler Germany

FAG axial deep groove ball bearings are available in single or double-direction design variants. These bearings are especially well suited to high axial loads

FAG (Schaeffler) - Motion Industries

Known for its industry leading ball bearing solutions, including current insulated ... spherical and versatile split spherical roller bearings, FAG is renowned as the 

INA/FAG Industrial Bearings from National Precision Bearing

INA/FAG from the Schaeffler Industrial Group. National Precision Bearing is an authorized distributor for INA/FAG bearings for the Schaeffler Group. Schaeffler Group Industrial brands INA and FAG are a leading global manufacturer of needle roller bearings, ball bearings, plain ball

FAG Bearings | E.B. Atmus Co., Inc

FAG Bearings have been synonymous with high quality for over 120 years. In 1883, Friedrich Fischer designed a ball grinding machine in Schweinfurt, Germany 

Products / Services | Bearing ... - Schaeffler North America

FAG housings and the associated bearings form bearing arrangement units that have proved themselves in machinery, plant and other equipment. FAG bearing 

 

FAG QJ312-MPA-C3 Angular Contact Ball Bearings Video

 

Contact Us

BEARING OF AMERICA CORP.
Address5030 Corporate Way Richmond, Kentucky 40475, U.S.A.
Phone(Working Time)626-5698
  • BEARING OF AMERICA CORP.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG QJ312-MPA-C3 Technical Articles

90x190x46.5 bearing dimensions tolerances
VXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup TypeVXB Brand 31318 Taper Bearing 90x190x46.5 Cone/Cup Type: Single-Row Tapered Roller Bearing Size: 90mmx190mmx46.5mm Bearing Inner Diameter:  Tapered Roller Bearing 31318 90x190x46.5 mm -...
6.35x15.875x4.978 bearing dimensions
Stainless Steel Bearing SS-R4 >>> 6.35x15.875x4.978, 2,55 €Stainless Steel Miniature Bearing SS-R4 6.35x15.875x4.978 > excellent Bearing | mostly lubricated with grease for the food industry > easy relubrication Fr4-zz Flanged...
600x980x375 bearing table
FAG 241/600BK30MB+H241/600 bearing 600x980x375Enquiry FAG 241/600BK30MB+H241/600 Spherical Roller Bearings from bearingforworld, demensions: 600x980x375 Bearings Online KOYO 241/600RK30 bearing in India - 600x980x375KOYO 241/600RK30 bearing in...

FAG Bearing CATEGORIES

  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
  • TOKYO KEIKI P Series Piston Pump
  • TOKYO KEIKI P*V Series Piston Pump
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI SQP Series Triple Vane Pump
  • TOKYO KEIKI Vane Pump
  • FAG Bearing
  • NSK Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • BOSTON GEAR BEARING
  • BROWNING BEARING
  • CONSOLIDATED BEARING
  • REXROTH Twin throttle check valve
  • REXROTH Throttle check valve
  • REXROTH Pressure relief valve
  • REXROTH Valves
  • REXROTH Pressure reducing valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Throttle check valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • REXROTH Directional spool valves
  • REXROTH Check valves
  • 6203du Bearing
  • tmst 3 Bearing
  • 698z Bearing
  • 608 bearing skf Bearing
  • Eaton Vickers ydraulic Pump
  • For Komatsu
  • For Rexroth
  • Gear Pump
  • Hydraulic Motor
  • Kawasaki ydraulic Pump
  • Parker Denison ydraulic Pump
  • Piston Pump
  • Replacement for CAT
  • Sauer ydraulic Pump
  • Vane Pump
  • Water Pump
  • Yuken Hydraulic Pump
  • Original Hydraulic Pump
MORE

Customers Who Viewed FAG QJ312-MPA-C3 Also Viewed

  • Timken lm102910 Bearing
  • 100 mm x 215 mm x 47 mm FAG 20320-MB Spherical Roller Bearings
  • FAG 6312-Z-C3 Single Row Ball Bearings
  • FAG 23220-E1-K-TVPB-C2 Spherical Roller Bearings
  • FAG 6414-MA-C3 Single Row Ball Bearings

Top Products

80 mm x 4.528 Inch | 115 Millimeter x 8.5 mm SKF WS 81216 Thrust Roller Bearing TOKYO KEIKI QP4-60-86C-18 Single Vane Pump DAIKIN VZ80C44RHX-10 VZ80 Series Piston Pump
get in touch with 11 Inch | 279.4 Millimeter x 12 Inch | 304.8 Millimeter x 0.5 Inch | 12.7 Millimet Timken lm102910 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

BEARING OF AMERICA CORP.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • DAIKIN VZ63 Series Piston Pump
    • DAIKIN VZ80 Series Piston Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI P Series Piston Pump
    • TOKYO KEIKI P*V Series Piston Pump
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI SQP Series Triple Vane Pump
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • BOSTON GEAR BEARING
    • BROWNING BEARING
    • CONSOLIDATED BEARING
    • REXROTH Twin throttle check valve
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH Valves
    • REXROTH Pressure reducing valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Throttle check valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • REXROTH Directional spool valves
    • REXROTH Check valves
    • 6203du Bearing
    • tmst 3 Bearing
    • 698z Bearing
    • 608 bearing skf Bearing
    • Eaton Vickers ydraulic Pump
    • For Komatsu
    • For Rexroth
    • Gear Pump
    • Hydraulic Motor
    • Kawasaki ydraulic Pump
    • Parker Denison ydraulic Pump
    • Piston Pump
    • Replacement for CAT
    • Sauer ydraulic Pump
    • Vane Pump
    • Water Pump
    • Yuken Hydraulic Pump
    • Original Hydraulic Pump
  • Technical Articles
  • DAIKIN VZ63 Series Piston Pump
  • DAIKIN VZ80 Series Piston Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

DAIKIN VZ63 Series Piston Pump

DAIKIN VZ80 Series Piston Pump

TOKYO KEIKI Double Vane Pump

Contact Us