NSK 1216J Self Aligning Ball Bearings

Type:Bearings with Housin; Bearing Part Number:6204; Housing Material:1045 Carbon Steel; Width T(mm):70; Number of Bearings:Double; Type:Bearings with Housin; Flange Shape:Round Type; Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Days to Ship:7 Days;

Max operating temperature, Tmax:110 °C; Da max:45.5 mm; Characteristic outer ring frequency, BPF0:2.57 Hz; Fatigue limit load, Cu:0.36 kN; D:52 mm; f0:12.4; Radial clearance class:CN; Characteristic inner ring frequency, BPFI:4.43 Hz; Mass:0.14 kg; d:20 mm;

C:12.8 kN; C0:6.65 kN; H:89 mm; d:17 mm; Designation of open end cover:SCO204-17; S:12.7 mm; Designation of housing:T204N-; A:32 mm; G:M6x1; H2:51 mm;

Volume Discount:Available; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; RoHS:6; Bearing Retained:No; Type:Bearings with Housin; Flange Shape:Square Type; Bearing Part Number:6902; Holder Surface Treatment:Not Provided;

da - Cone Frontface Backing Diameter:130 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:29700 lbf; db - Cone Backface Backing Diameter:134 mm; Cone Part Number:X32024X; Design Units:METRIC; Aa - Cage-Cone Backface Clearance:3 mm; C90 - Dynamic Radial Rating (90 million revolut

Series:2500; K - Factor8:2.14; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:8500 lbf; G1 - Heat Generation Factor (Roller-Raceway):23.6; da - Cone Frontface Backing Diameter:1.42 in; Ab - Cage-Cone Frontface Clearance:0.06 in; C0 - Static Radial Rating:21200 lbf; C1 - Dynamic Ra

Seal:Nitrile; Basic Load Rating, Dynamic Rating(N):84000; Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Surface Treatment:No; Days to Ship:Quote; Unit Body Material:Cast Iron; Accessory:No Cover; Rolling Element Material:Bearing Steel;

Bearing - Housing - Seal:MSM55BRH; Dimension S:1.6 in; Dimension B:6.0 in; Dimension V:4.5 in; Maximum Speed:3680 rpm; Ca - Axial Load Rating:1978 lbf; Dimension N:10.5 in; Support Type:Take-Up; Cr - Dynamic Load Rating:37768 lbf; Bearing Type:Split Cylindrical Re;

Weight:0.6 kg; d:15 mm; T max.:100 °C; C0:6.65 kN; Designation of housing:PG204N-; J:49 mm; C:12.8 kN; S:12.7 mm; s1:15.5 mm; A1:20 mm;

Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type; Flange Shape:Compact Type; Seals:DD (Contact Rubber S; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange O.D. H(φ):60;

Lubrication hole on inner ring:Non/No; B:30 mm; rs min:1 mm; Precision class:P0; da min:80 mm; Brand:NTN; t:2.2 mm; ras max:1 mm; d:75 mm; Mass:0.29 kg;

T max.:100 °C; N:16mm; e:10 mm; A2:44.9 mm; Weight:2.67 kg; G:M6x1; A:38 mm; B1:56.3 mm; Designation of housing:FC209-; d:44.45 mm;

d:12 mm; Precision Class:ABEC 1 | ISO P0; Brand:NTN; da min:14 mm; Dynamic load, C:5.1 kN; Snap Ring:No; Internal Special Features:No; Da max:26 mm; Enclosure:1 Seal; Nlim (oil):30,000 rpm;

Bearing - Housing - Seal UPC:013992084897; Bearing Type:Split Cylindrical Re; Dimension H:4.3 in; Dimension R:18.7 in; Note:This product line wa; Dimension N:15.750 in; Cr - Dynamic Load Rating:138033 lbf; Bolt Size:4 x M24; Dimension L:7.7 in; Maximum Speed:1070 rpm;

Total Width A:2.063 in; Bolt Hole Spacing J:149.2 mm; Total Height H2:106.4 mm; Dynamic Load Rating:8160 lbf; Weight:7.055 lb; Total Length L:191.3 mm; Housing Style:Two-Bolt Pillow Bloc; Base to Center Height H:53.98 mm; Dimension T:1.031 in; Bolt Hole Length N1:28.6 mm;